Automated liquid handling with greater flexibility
Manual tip loading
2,3 or 4 positions
Automated X & Z positioning
Serial dilution by column
The S-Pipette series multi-channel liquid handling pipettors bring automated liquid handling within reach of any lab that needs to routinely perform pipetting operations onto microplates.
Multi-channel liquid handling system. Interchangeable pipetting core.
Providing you with the flexibility to determine the configuration that best matches your application!
The S2 pipettor adds greater flexibility with automated X & Z positioning, automated plate sampling, and a removable WiFi enabled tablet.
Accessing the core
1 Remove lock screws on each side of the hood
2 Raise the hood carefully while still holding the hood, pull out the hood support rod and rest hood on support
1 Release core fasteners
2 Lift out the core in direction illustrated
3 Replace with 96 or 384 channel core
Control at your fingertips via Microsoft SurfaceTM Tablet. No external computer needed!
Intuitive Touch Screen
Pipettor + Head + Tips = Repeatable Results
The S2 pipettor, pipetting head, and tips in a variety of volumes is a triad that works together to help you get the best results.
EZ-Load = EZ-Change
The “pipette head” is separate from the
pipetting mechanism, allowing easy and
economical reconfiguration in the lab.
Changing heads only takes a few seconds –
easily reconfigure as needed!
For best pipetting results – consider pipette
tip selection along with the “pipette head”
that will be used.
EZ-Load Tip Technology
No tools required for a consistent seal!
S2-pipette uses exclusive EZ-Load tips to simplify pipettor operation with disposable tips.
S2 Pipettor Features and Benefits
High-performance instrument – easily configured for a variety of applications
Automated pipetting into all wells of a 96-well plate with the 96 core, into all wells of a 384-well plate with the 384 core
12x faster than an 8-channel handheld pipettor – pipette into all 96 wells without having to replace tips 12 times
Pipette 24, 96 and 384 full plate
Serial dilution by column: 8, 16
Automated split level plate elevators for plate sampling – automatically raise or lower plate/reservoir to programmable height
Apricot EZ-Load tip technology to load disposable tips quickly and easily, without tools!
Control via easy to use interface – Microsoft Tablet (WiFi-enabled)
2-, 3-, or 4-position shuttle with programmable serial dilution indexing
Small footprint maximizes bench space and fits suitable hoods
(96-1000) <3% CV at 10μL
(96-500) <3% CV at 5μL
(96/384 -125) <3% CV at 1μL
(96-1000) +/– 2% error at 10μL
(96-500) +/– 2% error at 5μL
(96/384 -125) +/– 2% error at 1μL
(96/384 -125) 0.1μL
Max channel capacity
(96) 125μL, 500μL, 1000μL
100 to 240 VAC, 50/60Hz
11.5”W x 14”D x 22.5”H (292mm W x 356mm D x 572mm H)